Pictures

To see full size pictures just click on pictures below.

XR250R Center Stand-$160+shipping

Much to my surprise the test stand fit perfectly. I never had a bike to fit it on but with the help of r00t4rd3d at ADVrider we made it happen on the first attempt. The stand is based on the XR650L stand and is very sturdy.

Pictures provided by r00t4rd3d

Cigar Mike

2006-2009 Husky TE610 Center Stand-$85.00 + Shipping

This center stand is based on the design shown in the parts fiche. It has been redesigned to provide more ground clearance after discovering that the feet would be to close to the ground on full compression of the rear suspension. It is a very tight fit with the side stand. They do touch and some manipulation may be needed to work the side stand and center stand. With the limited amount of room available it is the best that I can do. The stand works really well and should be a welcome addition.No obstructions below the skid plate. The rear mounting holes for the skid plate will have to be enlarged to accept the center stand bolts. The bolts are 1/2" bolts that require a 3/4" or 19mm wrench to tighten. Hardware included. I recommend using loctite on the bolts as well.
Not all of the bikes have the factory mounted upper spring mount post. I make a stand for models that don't have the factory mount also. Please check to see how your bike is equiped and be sure to let me know.

XT225 Center Stand $169.00 + Shipping

I was going to discontinue this stand but I have found out there is still interest in this model.

XR400 Center Stand $160 +Shipping

Rizal's XR400 in Singapore

Gladly's XR400 in the Yukonkawamatt2 SM'd XR400
Custom heights are avaiable upon request and applies to all center stands provided by Cigar Mike's.

XR650L Center Stand-$160

Andrew's XR650L in Florida

Custom Heights available for modified suspensions.

This is a bolt on unit that takes less then five minutes to install. This allows quick removal and installation so that XR650L can be configured differently depending your riding needs. Whether you are going on a long adventure ride or riding more technical terrain your XRL is set up the way you want it for that ride.

SM610 2006-2009 Center Stand-$85+S&H

The bike shown has a lowering link. I will need to have customers get a dimension for me so that I can make it the correct height. At least until I have done a couple stands for stock suspensions.

Not all bikes have the factory upper spring mount post. Please check to see how your bike is equiped and let me know when you order. I do have stands for both.